Rock Jock V-Bumper 45" |
RockJock® V-bumper - All new 45" wide bumper incorporates a V-shaped front face
with angled ends. The bottom of the bumper is angled like a skid plate and the top
of the bumper is plated all the way to the grille and holes are already installed
for a low profile winch mounting area.
Bumpers bolt on using 6 bolts that thread
into existing stock holes. Finished in semi-gloss black powder coat. Recommended
for use with Currie Antirock® sway bar. Also offered is the full line of bolt
on accessories for this bumper. |
$259.95 |
Rock Jock V-Bumper 55" |
RockJock® V-bumper Long - All new 55" wide bumper incorporates a V-shaped front
face with angled ends. The bottom of the bumper is angled like a skid plate and
the top of the bumper is plated all the way to the grille and holes are already
installed for a low profile winch mounting area.
Bumpers bolt on using 6 bolts that
thread into existing stock holes. Finished in semi-gloss black powder coat. Recommended
for use with Currie Antirock® sway bar. Also offered is the full line of bolt
on accessories for this bumper.
|
$299.95 |
Rock Jock V-Bumper Grille Guard |
RockJock® Grille Guard Surround Hoop - Easily bolts onto the V-bumpers. When
used in conjunction with a 1" body lift, this hoop cleanly follows the outside perimeter
of the vehicle's grille. Use CE-9099 fairlead mount for mounting of your winch fairlead
when using this hoop. Finished in semi-gloss black powder coat.
|
$199.95 |
Anti Rock Sway Bar |
For 1997-2006 Jeep TJ's and Unlimited's. The Currie Antirock® sway bar kit provides
balanced performance of front and rear suspension for rugged off-road conditions.
It gives the driver increased traction by balancing and distributing the weight
and traction over all four tires.
The Antirock® off road sway bar is designed
to directly replace the stock Jeep sway bar. This bar is made of SAE 4130 heat treated
steel for ultimate strength, which is the same quality used in professional off-road
competition sway bars.
This kit includes all components for installation including,
bushings, hardware, and step-by-step instructions. It is positioned through the
front cross member and attaches to the stock mounts on the axle housing on Jeep
TJ's and LJ's The Currie Antirock® sway bar does not need to be disconnected
for off-road use.
CAUTION: Jeeps will have more body roll than stock. This sway
bar may be used on the street however, it will not provide the same performance
as the stock setup.
|
$299.95 |
Currectlync Heavy Duty |
The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ,
XJ, and MJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid
alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread
tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer
bracket. This unit is a direct replacement for the stock parts.
No modifications
or machining to any part of the vehicle is necessary. This unit is rated at 200%
stronger than than the stock part.
|
$399.95 |
Steering Box Skid Plate |
For 1997-2002 Jeep Wrangler TJ's. Protects the steering box from rock bashing. Allows
for maximum approach angle and worry-free rock climbing -- it is built for, and
proven in, rock climbing competition. The TJ steering box skid plate is finished
in durable black powder coating, and constructed of thick steel plate. It easily
bolts on to the frame and the underside of the RockJock V-bumpersr. It will also
fit some 'copies' of the original Currie Bumper.
WORKS WITH CURRIE BUMPERS OR COPIES
OF CURRIE BUMPERS ONLY!
|
$49.95 |
Stabilizer |
For 1997-2006 Jeep TJ's, and all years of Unlimiteds, XJs and MJs. For the Jeep
enthusiast who wants improved steering control. The Currie super duty steering stabilizer
is a Rancho RS5000 and works on and off the road by absorbing shock loads transmitted
from the front wheels to the steering system. This product replaces the stock stabilizer.
The steering stabilizer is designed to provide superior shock absorbing characteristics
and comes with a polyurethane dust cover and all mounting hardware.
|
$42.95 |
Drag Link |
Adjuster only for pitman arm end of Currie Currectlync® heavy duty drag link.
|
$49.95 |
Anti Rock Lift Kit |
The Currie Johnny Joint® suspension system kit is a complete package that replaces
all eight stock control arms and provides a 4" lift. It is engineered to provide
unrivaled articulating flexibility and performance in the most adverse off-road
conditions. The Johnny Joint® system keeps the tires in contact with the terrain
for maximum traction.
Kit includes 8 Johnny Joint® control arms, 4 4" lift coil
springs, 4 Rancho RS9000 shocks, Johnny Joint® adjustable front trac bar, rear trac
bar relocation bracket, Currie Antirock® front sway bar, rear sway bar extended
links, and the Currie front and rear poly urethane bump stop kits.
|
$2074.95 |
